Kramer-electronics VP-747 Instrukcja Użytkownika Pobierz pdf (Strona 35)

30 VP-747 - Operating the VP-747

Preview and Program Setting OSD Menus

Setting Function Default

V - Size Set custom size: 1 to 255 5

Frame Turn the PIP frame: On or Off On

Frame Color Select the color of the PIP frame: Red, Green or Blue Blue

Output

Resolution

640x480x60Hz, 640x480x75Hz, 800x600x50Hz, 800x600x60Hz,

800x600x75Hz, 832x624x60Hz, 852x480x60Hz, 1024x768x50Hz,

1024x768x60Hz, 1024x768x75Hz, 1280x768x50Hz,

1280x768x60Hz, 1280x720x60Hz, 1280x800x60Hz,

1280x1024x50Hz, 1280x1024x60Hz, 1280x1024x75Hz,

1366x768x50Hz, 1366x768x60Hz, 1400x1050x50Hz,

1400x1050x60Hz, 1440x900x60Hz, 1600x1200x50Hz,

1600x1200x60Hz, 1680x1050x60Hz, 1920x1080x50Hz,

1920x1080x60Hz, 1920x1200x60Hz, 480px60Hz, 576px60Hz,

720px50Hz, 720px60Hz, 1080ix50Hz, 1080ix60Hz, 1080px50Hz,

1080px60Hz, 1080p@24Hz, 480px59.94Hz, 720px59.94Hz,

1080ix59.94Hz,

1080px23.97Hz, 1080px29.97Hz, 1080px59.94Hz

or one of 4 Custom resolutions

The embedded audio feature is not available for the RGB

resolutions 1920x1200 and 1920x1080. (It is available for 1080p)

If the custom resolution is set to be the same as the default resolution, the

scaler refers to the default resolution

1024x768

x60Hz

HQV Color

Setting

Set the Red, Green, Blue, Cyan, Magenta and Yellow saturation: -

100 to 100

Setup

Input Mode Setting (see Figure 13)

Output mode setting (see Figure 14)

Geometry

Application Select the output application: Keystone, Anyplace or Rotation keystone

Location

Select the location of the display: Front, Ceiling, Rear or Rear

ceiling

Front

Horizontal

Keystone

Adjust the horizontal keystone: -40 to 40

If the projector is located at an angle to the left or right of the screen

Vertical

Keystone

Adjust the vertical keystone: -30 to 30

If the projector is located at an angle above or below the screen

Diagonal

Projection

Move the location of each corner of the display separately

(horizontally and vertically): Top Left, Top Right, Bottom Left,

Bottom Right or Reset (to reset diagonal projections settings)

Top Left

Pincushion/

Barrel

Adjust the pincushion or barrel appearance of the screen: -20 to 20

For projection onto curved surfaces

Rotation

Rotate the display clockwise or counterclockwise (in 1° increments):

-180 to 180

Reset all Resets the geometry settings to their default values

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 64 65

Komentarze do niniejszej Instrukcji

Brak uwag

Kramer-electronics VP-747 Instrukcja Użytkownika Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Kramer-electronics VP-747