Kramer-electronics VP-747 Instrukcja Użytkownika Pobierz pdf (Strona 33)

28 VP-747 - Operating the VP-747

8.1.1 Preview and Program Setting Commands

Figure 12: Preview and Program Setting OSD Menus

Preview and Program Setting OSD Menus

Setting Function Default

Input Sub-menu

Source Select the input source: Channel 1 to 8 Channel 1

Type Set the video type: RGBHV, RGBS (PC/Video), RGsB (PC/Video),

YCbCr, Y/C or video, HDMI (for input 1 and input 2 only)

RGBHV

Video Standard Set the Video standard: Auto, NTSC, PAL, PAL-M, PAL-N, NTSC

4.43, SECAM or PAL 6

Auto

H-Position Set the horizontal position for UXGA and component video inputs

The range changes according to the input mode

V-Position Set the vertical position

Frequency Adjust the frequency

for UXGA inputs

Phase Adjust the phase only for a VGA Source: 0 to 31 0

Auto Image Assesses the image and improves the quality accordingly, by

automatically adjusting the phase, frequency and position. Upon

completion, the relevant OSD values are updated (H-Position, V-Position,

Phase and Frequency)

Overscan Allows stretching of the outputted picture: On or Off

Enabled only for HD input resolutions

Picture Sub-menu

Brightness Adjust the brightness: -50 to 50 0

Contrast Adjust the contrast: -50 to 50 0

Color Adjust the color: -50 to 50 0

Hue Adjust the hue: -180 to 180 0

Sharpness Adjust the sharpness: -50 to 50 0

Output Gamma Adjust the gamma: 1 to 4 1

Film Mode Set the film mode: Auto, Video or Film Auto

Temporal NR Set the temporal noise reduction level: Off, Low, Medium or High

You do not have to press ENTER after selecting the desired

parameter to change it

High

Mosquito NR Set the Mosquito noise reduction level: Off, Low, Medium, High Low

Block NR Set the block noise reduction level: Off or On High

Detail

Enhancement

Set the detail enhancement: Off, Low, Medium or High Off

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 64 65

Brak uwag

Kramer-electronics VP-747 Instrukcja Użytkownika Strona 33