Kramer-electronics VP-747 Instrukcja Użytkownika Pobierz pdf (Strona 13)

8 VP-747 - Overview

# Feature Function

1 IR Receiver/LED Green when ON; red when OFF

OFF in this case means that the outputs and the front-panel are disabled

PREVIEW

Buttons

INPUTS Selects the video source (from 1 to 8) for the Preview output

From the five BNC (universal) inputs for each of the inputs. The INPUT

buttons 1 and 2 can also select the DVI/HDMI sources

3 PIP Toggles the picture-in-picture function on and off on the Preview output

4 BLANK Toggles between a blank screen and the selected input on the preview

output

5 FREEZE Freezes the output video image (toggle) on the Preview output

PROGRAM

Buttons

INPUTS Selects the video source (from 1 to 8) for the Program output

7 FREEZE Freezes the output video image (toggle) on the Program output

8 BLANK Toggles between a blank screen and the selected input on the Program

output

9 PIP Toggles the picture-in-picture function on and off on the Program output

10 TAKE Button Pressing TAKE causes the transition to occur

The effect is only seen in PROGRAM Mode. The PREVIEW screen

blanks during the transition

11 FADE Button Selects a dissolved transition from the PREVIEW output to the

PROGRAM output

TRANSITION Buttons

Selects a WIPE transition effect

To choose the direction from where the effect starts: “left to right”, “right to left”, “up” or

“down”, see

Section 8.1.3

Selects a SQUARE transition effect

Selects a CHESSBOARD transition effect

Selects a DIAGONAL transition effect

To choose the direction from where the effect starts: “top left”, “bottom left”, “top right”

or “bottom right”, see

Section 8.1.3

Selects a CIRCLE transition effect

To choose the direction of the effect: “in” or “out”, see

Section 8.1.3

Selects a CORNER transition effect

18 CUT Button Selects an instantaneous transition from the PREVIEW output to the

PROGRAM output

Only for setting up the unit for the effect. The effect only occurs when the Take button

is pressed

19 OSD Button Activates/deactivates access to the OSD Menu on the Preview output

NAVIGATION

Buttons

Toggles within each level 2 command/increases the range by one step

Moves up one step (in the same level) in the OSD menu

Moves down one step (in the same level) in the OSD menu

Toggles within each level 2 command/decreases the range by one step

24 ENTER Button Moves to the next level in the OSD menu

25 MENU Button Displays the OSD Menu screen (or moves to the previous level in the

OSD menu)

26 LCD STATUS

Display

Displays the status of the unit, and is used for menu navigation

27 PANEL LOCK

Button

Locks/unlocks the front panel

Press and hold for about 2 seconds to toggle

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 64 65

Komentarze do niniejszej Instrukcji

Brak uwag

Kramer-electronics VP-747 Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Kramer-electronics VP-747