Kramer Electronics VP-417 Instrukcja Użytkownika Pobierz pdf (Strona 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the VP-417 Video to PC/HD/DVI Scaler

1. Connect a CV source (for example, a composite video player) to the CV IN

connector.

2. Connect a Y/C source (for example, an s-Video player) to the Y/C IN connector.

3. Connect the PC/HD OUT 15-pin HD connector to a PC/HD acceptor (for

example, a PC display or HDTV acceptor) as follows:

 When connecting to a VGA acceptor (RGBHV), connect to the acceptor’s

VGA connector

 When connecting to a component acceptor (YPbPr), connect as shown in

Table 3

Table 3: 15-pin HD Pinout for HD

PIN # Signal

1 Pr

2 Y

3 Pb

6, 7, 8 Ground

4. Connect the DVI OUT connector to a DVI

5. Connect the 5V DC power adapter to the power socket and to the mains

electricity (not shown in

acceptor (for example, a DVI

projector).

Figure 3).

6 Operating the VP-417 Video to PC/HD/DVI Scaler

The VP-417 is operated directly via the front panel buttons and via the OSD

(On-screen Display) menu (see Section

6.2).

6.1 Using the Front Panel Buttons

During normal operation (without the OSD), the front panel buttons operate in the

following manner:

• INPUT SELECT: Toggles between the CV and Y/C inputs

• OUTPUT RESOLUTION : Cycles through the following output

resolutions after displaying the current output resolution;

 HD LED off: XGA, WXGA, SXGA, UXGA and WUXGA

 HD LED on: 480p, 576p, 720p, 1080i and 1080p

• MENU: Opens the OSD main menu (see Section

6.2). Press a second time

to close the OSD

• ENTER: Selects the highlighted menu item or parameter

1 Or HDMI

1 2 3 4 5 6 7 8 9 10 11 12 13

Brak uwag

Kramer Electronics VP-417 Instrukcja Użytkownika Strona 8