Kramer-electronics VP-790 Instrukcja Użytkownika Pobierz pdf (Strona 33)

VP-790 - Controlling the VP-790

7 Controlling the VP-790

The VP-790 can be controlled via:

 The front panel buttons (see Section 7.1)

 RS-232 serial commands transmitted by a touch screen system, PC, or other

serial controller (see Section 7.2)

 The ETHERNET (see Section 7.3)

 The infrared remote control transmitter (see Section 7.4)

7.1 Controlling via the Front Panel Buttons

The VP-790 includes the following front panel buttons:

 Input selector buttons for selecting the required input: SDI, s-Video (YC), CV

(1 and 2), COMPONENT (YPbPr), PC, HDMI, or DVD-D

 The PIP button

 MENU, ENTER, and arrow buttons (up, down, left and right)

 RESET TO XGA/720p and PANEL LOCK buttons

7.2 Connecting to the Product via RS-232

You can connect to the VP-790 via an RS-232 connection using, for example, a PC.

Note that a null-modem adapter/connection is not required.

To connect to the VP-790 via RS-232, connect the RS-232 9-pin D-sub rear panel

port on the VP-790 unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3,

and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your

PC.

7.3 Controlling via the Ethernet

You can connect the VP-790 via the Ethernet, using a crossover cable (see Section

7.3.1) for direct connection to the PC or a straight through cable (see Section 7.3.2)

for connection via a network hub or network router.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 46 47

Brak uwag

Kramer-electronics VP-790 Instrukcja Użytkownika Strona 33