Kramer-electronics RB-8 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Overview

3 Overview

The Kramer RB-8 is a high-performance, high-voltage power supply that

supplies power to up to eight external units. Each output channel includes a

power socket and a 2-pin terminal block control port. When the control port

is connected, the contact-closure supplies power to that channel. LEDs on

the front panel indicate which ports are supplying power to their devices.

The RB-8 is housed in a 19-inch, 1U rack-mountable enclosure, and is

is a model for use in America with 110V AC American power sockets, and

the RB-8E is for use in Europe with 220V AC European power sockets.

“RB-8” is printed on the front panel of both models.

To achieve the best performance:

 Use only good quality connection cables

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables).

 Avoid interference from neighboring electrical appliances that

may adversely influence signal quality and position your Kramer

RB-8 away from moisture, excessive sunlight and dust

4 Your RB-8/RB-8E 8 Channel Power Controller

Table 1, Figure 1, Figure 2, and Figure 3 define the unit.

Table 1: RB-8/RB-8E 8 Channel Power Controller Functions

Feature

Function

1 ACTIVE OUTPUT LEDs Illuminate green when supplying power (from 1 to 8)

2 OUT Female power socket AC connector enabling power supply to the attached unit

(from 1 to 8)

3 CONTROL Pin When grounded, the port powers ON (from 1 to 8)

4 GND (Ground) Pin Ground for control contact (from 1 to 8)

5 POWER Switch Illuminated switch for turning the unit ON and OFF

6 POWER IN with fuse

AC connector supplying power to the RB-8

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

1 2 3 4 5 6 7 8 9 10 11

Brak uwag

Kramer-electronics RB-8 Instrukcja Użytkownika Strona 5